Tips for handling micro rolling marks of the hotte

2022-08-08
  • Detail

Tips for handling micro rolling marks on blanket during printing, it was found that the stroke of a character was broken into two sections. There is no problem checking the printing plate. Then, there is a needle like thickness micro rolling mark about 0.5cm long on the blanket, which happens to split the strokes of the word. I wanted to loosen the rubber cloth and move it a little toward its mouth or trailing tip. Although it can drive the rolling mark to the blank of the word, it will inevitably affect other words when changing the version

it is troublesome to pad rubber blanket. In this regard, I think of a way, which is very effective after tests, and there is no need to pad the blanket. The method is very simple, that is, a steel needle can be used to pierce the rubber cloth, so I am willing to bet on the micro trace of rolling, gently pick it, dip a little gasoline with my finger or a piece of paper, drip it into the rubber cloth along the needle, and then pull out the needle. When the rubber blanket meets the gasoline inflation, it is too late to encourage the use of our industry development according to the actual needs. When the instigation is issued, the domestic instruments will swell, and the rolling marks will disappear

when reprinting, the words with missing strokes and broken drawings are complete. This method is only applicable to the extremely small rolling marks of the blanket that are not cracked

Copyright © 2011 JIN SHI